Reinstall

Do you have to paint, renovate, or do any other work at home? Then, we have instructions that will help you reinstall one or some of your alarm components.

Domonial panel
Domonial panel

This product needs to be re-installed by a security advisor to ensure the best alarm signals are received to function correctly. Please click here to arrange a service appointment via our chatbot. 

Domonial Keypad (GKP model)
Domonial Keypad (GKP model)

Reinstall

Read Instructions Read Instructions
Domonial PIR Motion Sensor with Camera
Domonial PIR Motion Sensor with Camera

Reinstall

Read Instructions Read Instructions
Domonial Magnet Contact Sensor
Domonial Magnet Contact Sensor

Reinstall

Read Instructions Read Instructions
Domonial smoke detector (DFS8M model)
Domonial smoke detector (DFS8M model)

Reinstall

Read Instructions Read Instructions

Please carefully review these instructions before proceeding to avoid damaging components. There may be a cost to replace any components that are damaged during renovations. If you need help, contact us via chat.

Re-install
  1. Align the keypad bracket, screw in the 3 screws to secure the bracket to the wall with a Phillips (crosshead) screwdriver or a drill. 
  2. Slide the keypad downwards onto the bracket. 
  3. Once the Keypad is placed onto the bracket, insert the screw at the top of the keypad with a small Phillips (crosshead) screwdriver. 
  4. Wait 1 minute then enter your alarm code three times, lights on the keypad will clear. Any faults lights on Keypad, direct customer to chatbot or user manual. 
Re-install
  1. Align the bracket, screw in the 4 screws to secure the bracket to the wall with a Phillips (crosshead) screwdriver or a drill. 
  2. Place the sensor back onto the bracket – Insert top part of sensor first then bottom part. Make sure the sensor is clicked firmly into place.  
  3. Wait 1 minute then enter your alarm code three times, lights on the keypad will clear. Any faults lights on Keypad, direct customer to chatbot or user manual. 
Re-install
  1. Align the larger bracket with the door frame/window frame. Screw in the 2 screws to secure the bracket with a Phillips (crosshead) screwdriver or a drill. 
  2. Align the sensor cover with the bracket by ensuring the ridges on each end match. Click the cover firmly into place.  
  3. If necessary, insert the small screw on the side of the sensor.  
  4. Align the smaller bracket onto the door/window itself. Screw in the 2 screws to secure the bracket to the door/window with a Phillips (crosshead) screwdriver or a drill. 
  5. Align the sensor cover with the bracket by ensuring the ridges on each end match. Click the cover firmly into place.  
  6. Once re-installed, wait 1 minute then enter your alarm code three times, lights on the keypad will clear. Any faults lights on Keypad, direct customer to chatbot or user manual. 
Re-install
  1. Align the bracket with the ceiling and screw in the screws to secure the bracket back onto the ceiling with a Phillips (crosshead) screwdriver. 
  2. Once bracket is back on the ceiling, place smoke detector back onto bracket and twist anticlockwise to secure. 
  3. Wait 1 minute then enter your alarm code three times, lights on the keypad will clear. Any faults lights on Keypad, direct customer to chatbot or user manual.